Uncategorized
Tube Cutter Push Type – 1/2” to 2” Outer Diameter
Push Type Tube Cutters are designed for cutting and removing ferrous and non-ferrous tubes with 1/2 to 2-inch (12.7 – 50.8mm) Outer Diameter. These efficient tools cut tubes in seconds and attach to both electric and pneumatic drills. The tube trimmer is attached to the push type tube cutter when considerable tube projection needs to be cut off.
Various lengths, that are able to cut past the tubesheet, are available; depending on the Gauge and the material of tube, bits with protective coating are also available. While it is difficult to cut heavy Gauge tube .016-inch and up, this tool simplifies the process.
Tube Cutter – 1/2” to 1-1/2” Outer Diameter
One Revolution Tube Cutters are used in heat exchangers. They cut up to 10-inch thick tubesheets and tubes with 1/2 to 1-1/2-inch (12.7 – 38.1mm) Outer Diameter. No special drives are required as these Tube Cutters can be used with a hand wrench or ratchet.
They can therefore also be effectively used to vent tubes before plugging.
Tube End Facing Tools – 5/8” to 2” Outer Diameter (some sizes made to order)
The Insert Type Facing Tool features an adjustable collar that provides projection control as well as cutter bits that can be easily replaced, significantly lengthening the life of the product. Delrin Pilots are available for 5/8-inch (15.9mm) and larger tools for non-scoring applications. Insert Type Tube End Facing Tools can be used on tubes with a 5/8 to 2-inch Outer Diameter (15.9 – 50.8mm).
Tube End Facing Tools – 1/4” to 9/16” Outer Diameter
The Fixed Type Tube End Facing Tool features an adjustable collar that provides projection control for flute high-speed steel and allows for simple replacement of pilots. This tool can be used on tubes with a 1/4 to 9/16-inch Outer Diameter (6.4 – 14.3mm).
Tube End Facing Tools – 5/8” to 2” Outer Diameter
Both the Flat and Radius Tube End Facing Tools trim tubes to a consistent projection. They feature an adjustable collar for projection control, a removable taper or chucking shank that provides drives flexibility and cutters that can easily be sharpened. These Flat and Radius Facing Tools can be used on tubes with a 5/8 to 2-inch Outer Diameter (15.9 – 50.8mm).
Tube Wall Reducing Tool – 1/4” to 1-1/2” Outer Diameter
Tube Wall Reducing Tools help relieve tube joints prior to cutting. Their innovative, self-center design prevents damage to the sheet. In addition, tubes do not need to be cleaned prior to use. Tube Wall Reducing Tools can be used on tubes with a 1/4 to 1-1/2-inch Outer Diameter (6.4 – 38.1mm).
Tube Knockout and Collapsing Tools – 1/4” to 2” Outer Diameter
Tube Knockout and Collapsing Tools minimise removal costs and are specially designed as companions to the Tube Wall Reducing Tool. Tube Knockout and Collapsing Tools can be used on tubes with a 1/4 to 2-inch Outer Diameter (6.4 – 50.8mm). Tube Knockout Tools are also available in extra lengths for 5/8 to 1-1/4-inch Outer Diameter (15.9-31.8mm). Tube knockout tools for use with a No. 80 Boyer Gun can also be provided and are available in sizes from 1 to 2-inch (25.4-50.8mm) Outer Diameter.
Extra-Length Tube Knockout Tools – 5/8” to 1-1/4” Outer Diameter
Extra-Length Tube Knockout Tools minimize tube removal costs for extra-long tubes.
Tube Knockout Tools for Use with No. 80 Boyer Gun – 1” to 2” Outer Diameter
These Tube Knockout Tools are specifically designed for easy use with the No. 80 Boyer Gun.