Uncategorized
Tube Lubricant
Lubricant for tube expanders and other applications for all your maintenance and repair work needs is available. Select the right lubricant for your application: Expander Lube – Type B for expanding, B-Kool for beading and WilsoLube for air tools.
Heat Exchanger Cleaning Brushes — 5/8″ to 6-1/2″ Outer Diameter
The Expanding Brush is ideal for removing light to medium powdery deposits such as rust, scale and chemical precipitates in tubes from 5/8-inch to 6-1/2-inch Outer Diameter. The Expanding Brush lasts 10 to 20 times longer than conventional brushes providing an excellent value. The Expanding Brush is available with steel, stainless steel, bronze or nylon brush bristles.
Heat Exchanger Cleaning Heads — 5/8″ to 6-1/2″ Outer Diameter
The Expanding Scraper compliments the Expanding Brush and is recommended for removing soft, wet, or gummy deposits, such as mud or marine growth. The Expanding Scraper cleans tubes from 5/8-inch to 6-1/2-inch Outer Diameter. The blades in the Expanding Scraper do not fill with debris as they do when cleaning soft and gummy deposits with a brush and are quickly replaced as they wear.
Shafts and Casing
Wils-Away™ Shafts and Casings are available in nylon, Teflon® and steel. Smaller diameter casings are nylon (or Teflon®, if they will be run dry) and larger casings are steel and nylon rubberised materials. Shafts and Casings parts are designed for forward/reverse cleaning, such as cleaning enhanced tubes with a Spin Grit or Spin Clean brush. All shafts and casings are designed to attach to competitors’ tube cleaners.
Heat Exchanger Cleaning Rods and Handles
Manual Tube Cleaning Extension Rods and Handles are available in .16 to 1-1/2-inch diameter range. The available lengths are 2, 3, 4, 5 and 6-feet. Any material brush can be used. Special kits can also be made for specific applications.
Heat Exchanger Buffing Tools — 1/2″ to 3-1/2″ Outer Diameter
Buffing Tools are made for the final finish cleaning of 1/2 to 3-1/2-inch Outer Diameter Tubes. Sets of wires clean away debris after using an Expanding Brush or an Expanding Scraper. Replacement wire blades keep the unit affordable.
Heat Exchanger Spiral Cleaning Brushes
Spiral Brushes are available in nylon, brass (for copper tubes), steel and stainless steel. Remember to always match metals. The Spin Grit and Spin Clean Brushes have abrasive-impregnated nylon filaments and they are specially designed for cleaning enhanced tubes in heat exchangers and tubes in surface condensers.
U-Bend Heat Exchanger Brush — 3/4″ to 1-1/2″ Outer Diameter
The U-Bend Cleaning Assembly is designed for cleaning 3/4 to 1-1/2-inch Outer Diameter curved tubes. The stainless steel assembly is ideal for cleaning ferrous tubes, while the brass cleaning head is ideal for cleaning nonferrous tubes.
Heat Exchanger Cleaning Brushes — 3/8″ to 2-3/16″ Outer Diameter
AP Brush is used after a Cutter Bit has cleaned heavily clogged tubes. The P Brush is also used with the Push Rod for manual cleaning of condensers, evaporators and fire tube boilers. These brushes can be used on PG, PGX and TP302 models. Bit Adapters are used to connect P Brushes to drill shafts.