The Hydraulic Tube Cutter quickly and efficiently cuts tubes in front of the tube sheet. In fact, it can cut a 2-inch Outer Diameter tube in just 8 seconds. The Hydraulic Tube Cutter automatically raises the cutter wheel, cleanly cutting through the tube. An adjustable collar ensures the tubes are consistently cut at precisely the right tube position.
The Series 38 Expanders are designed for rolling and flaring in a single operation, provide excellent manoeuvrability and convert to straight-roll expanders. They are suitable for water tube boilers, fire tube boilers, superheaters and economizers. They are made of selected chrome nickel alloy steel and treated in automatic electrically controlled furnaces to help ensure the longest possible service life.
The Series 114 are equipped with four expanding rolls and two flaring rolls that are overlapped to prevent ridging. These tools can expand and flare in one operation. They are ideal for water tube boilers, fire tube boilers, economisers and air heaters. They can help reduce overall inventory since less equipment is required and more flexibility is offered with the interchangeable rolls and mandrels. They are made of selected chrome nickel alloy steel and treated in automatic electrically controlled furnaces to help ensure the longest possible service life.
The Series 114-S Expander tools allow for non-flaring tube expansion, such as straight expanding before or after the welding process, or in tightening up a leak tube after beading or flaring. The 114-S tools have the same mandrel and rolls as the 114 Flare Tools do. The 114-S Tools are suitable for water tube boilers, fire tube boilers, economisers and air heaters. Their compact design permits use in limited space through small handholes and headers.
The Series 65 Expanders are specifically designed for ‘deep-reach’ expanding. With their parallel rolling and long, effective roll length, these tools are ideal for ‘touch-up’ rolling in thick tube sheets. With thrust ball bearing collars, these tools offer friction-free operation and long tool life. Rolls are self-retained in a cage and will not fall in or out of the cage when the mandrel is withdrawn from the expander.
Tube Wall Reducerin standard drill machine. Front end is suitably grounded as per tube gauge to facilitate reduction of tube thickness there by weakening expansion joint of tube for its removal.
Specifications
| Tube O.D. inch | Model Number | MT Shank # |
| 3/8 | WR-375 | 1 |
| ½ | WR-500 | 2 |
| 5/8 | WR-625 | 2 |
| 3/4 | WR-750 | 2 |
| 7/8 | WR-875 | 2 |
| 1 | WR-1000 | 3 |
| 1.1/4 | WR-1250 | 3 |
| 1.1/2 | WR-1500 | 3 |
| 1.3/4 | WR-1750 | 3 |
| 2 | WR-2000 | 3 |
| 2.1/2 | WR-2500 | 4 |
| 2.3/4 | WR-2750 | 4 |
| 3 | WR-3000 | 4 |
| 3.1/4 | WR-3250 | 4 |
| 3.1/2 | WR-3500 | 4 |
| 4 | WR-4000 | 4 |
Build from high impact steel for knocking out tube from tube sheet with pneumatic hammer. Front end maligned as per tube gauge for correct alignment of tool there by facilitating removal of tube without damaging tube sheet.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | KT-375 |
| ½ | KT-500 |
| 5/8 | KT-625 |
| 3/4 | KT-750 |
| 7/8 | KT-875 |
| 1 | KT-1000 |
| 1.1/4 | KT-1250 |
| 1.1/2 | KT-1500 |
| 1.3/4 | KT-1750 |
| 2 | KT-2000 |
| 2.1/2 | KT-2500 |
| 2.3/4 | KT-2750 |
| 3 | KT-3000 |
| 3.1/4 | KT-3250 |
| 3.1/2 | KT-3500 |
| 4 | KT-4000 |
Used for collapsing the nonferrous tubes or ferrous tube made thinner using tube wall reduce for driving the tube out of tube sheet. Preferably to be use with pneumatic hammer.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | CT-375 |
| ½ | CT-500 |
| 5/8 | CT-625 |
| 3/4 | CT-750 |
| 7/8 | CT-875 |
| 1 | CT-1000 |
| 1.1/4 | CT-1250 |
| 1.1/2 | CT-1500 |
| 1.3/4 | CT-1750 |
| 2 | CT-2000 |
| 2.1/2 | CT-2500 |
SUBZERO make ATP series tube cutters are designed to cut walls of tubes internally.
Features:
Operation
Specifications
| Tube O.D. | Tube Gauge (BWD) | Tube Cutter Model No. | Spare Cutting Bit Model No. | Size |
| 5/8″ | 14-22 | ATP-625 | ATP-625-SB | 3/8″ |
| 3/4″ | 14-22 | ATP-750 | ATP-750-SB | |
| 7/8″ | 14-22 | ATP-875 | ATP-875-SB | |
| 1″ | 12-22 | ATP-1000 | ATP-1000-SB | |
| 1.1/4″ | 12-22 | ATP-1250 | ATP-1250-SB | 1/2″ |
| 1.1/2″ | 12-22 | ATP-1500 | ATP-1500-SB |
Standard adjustable reach is 4″(101.6mm) and they are available in optional increments of 2″(50.8mm).
“A” reach= 6″(152.4mm). “B” reach= 8″(203.2mm). “C” reach= 10″(254.0mm).
Recommended Drive
| Model | Tube Size | Chuck Size | Weight (Kg) |
| Drive-3 | 5/8″ – 1″ | 3/8″ | 8.5 |
| Drive – 5 | 1.1/4″ – 1.1/2″ | 1/2″ | 7.5 |
