Tube installation tools

NW Series Grooving Tool

Features:

• Changing of pilot nose and cutter allows one tool to cover a range of hole diameters.
• Simple to change cutter for different groove shapes.
• Location and depth of cut easy to adjust.
• Only light pressure required to cut precision grooves.
• Ready to fit in CNC drill, lathes and boring machines.
• The life of the cutter is extendable by re-sharpening.

Specifications

Bore RangeUnit		Tool Model No.	Pilot Nose Model No.	Circular Form Cutter Model No.	Tool Bit Holder Model No.	Spare Tool Bit Model No.
mm	Inch
9-32	3/8-1.1/4	1 NW-2 MT	1 NW-PN	1 NW-CF	1 NW-TBH	1 NW -TB
16-45	5/8-1.3/4	3 NW-3 MT	3 NW-PN	3 NW-CF	3 NW-TBH	3 NW -TB
19-48	3/4-1.7/8	4 NW-4 MT	4 NW-PN	4 NW-CF	4 NW-TBH	4 NW -TB
38-102	1.1/2-4	6 NW-5 MT	6 NW-PN	6 NW-CF	6 NW-TBH	6 NW -TB

Download PDF

ST Series Grooving Tool

Features:

• High production tool
• Ideal for use where 1 tool is needed per bore
• Tool is ideally suited for CNC applications on account of one piece mandrel construction and short design.

Specifications

Tube O. D.		Tool Model No.	Spare Tool Bits
mm	Inch		1/8 X 3/8 X 1/8 Spacing	1/8 X 1/4 X 1/8 Spacing	Special Spacing.
9.53	3/8	ST-375-970	ST-3703	ST-3703-S	ST-3703-SP
12.70	1/2	ST-500-1270	ST-5003	ST-5003-S	ST-5003-SP
15.87	5/8	ST-625-1588	ST-6203	ST-6203-S	ST-6203-SP
19.05	3/4	ST-750-1900	ST-7503	ST-7503-S	ST-7503-SP
22.22	7/8	ST-875-2220	ST-7503	ST-7503-S	ST-7503-SP
25.40	1	ST-1000-2540	ST-7503	ST-7503-S	ST-7503-SP
28.57	1.1/8	ST-1125-2553	ST-7503	ST-7503-S	ST-7503-SP
31.75	1.1/4	ST-1250-3175	ST-7503	ST-7503-S	ST-7503-SP
34.92	1.3/8	ST-1375-3493	ST-7503	ST-7503-S	ST-7503-SP
38.10	1.1/2	ST-1500-3810	ST-7503	ST-7503-S	ST-7503-SP
41.27	1.5/8	ST-1625-4128	ST-7503	ST-7503-S	ST-7503-SP
44.45	1.3/4	ST-1750-4445	ST-7503	ST-7503-S	ST-7503-SP
47.62	1.7/8	ST-1875-4763	ST-7503	ST-7503-S	ST-7503-SP
50.80	2	ST-2000-5080	ST-7503	ST-7503-S	ST-7503-SP
57.15	2.1/4	ST-2250-5715	ST-7503	ST-7503-S	ST-7503-SP
63.50	2.1/2	ST-2500-6350	ST-7503	ST-7503-S	ST-7503-SP

Download PDF

SGT Series Grooving Tool

Features:

• Only light pressure required to cut precision grooves inside holes or cylinders.
• Location and depth of groove easy to adjust.
• Simple to change cutter for different groove shapes.
• Changing of bushing and cutter allow one tool to cover a range of hole diameters.
• The life of the cutter extendable by re sharpening.

Specifications

Tube O. D.		Tool Model No.	Pilot Nose / Bushing Model No.	Tool Bits Model No.
mm	Inch
10-13	0.40-0.51	SGT -102	SGT-102-PN	SGT-102-TB
12.7 -16	0.50 -0.63	SGT-122	SGT-122-PN	SGT-122-TB
16 -20	0.63 -0.79	SGT-162	SGT-162-PN	SGT-162-TB
19 -32	0.75 -1.26	SGT-193	SGT-193-PN	SGT-193-TB
30-52	1.18-2.05	SGT-303	SGT-303-PN	SGT-303-TB
50 -78	1.97 -3.07	SGT-504	SGT-504-PN	SGT-504-TB

Download PDF

RM Series Tube Sheet Hole Reamer

Specifications

Tube O. D.		Reamer Size to “TEMA” Specification		Model No.	Flute Length		OAL		Empty Shank Size
mm	Inch	mm	inch		mm	inch	mm	inch
9.53	3/a8	9.65	.380	RM-095/66 RM-095/101 RM-095/152	66 101 152	2.60 3.97 5.98	146 181 232	5.70 7.12 9.13	1
12.70	1/2	12.83	.505	RM-127/76 RM-127/101 RM-127/152	76 101 152	2.99 3.97 5.98	156 181 232	6.14 7.12 9.13	1
15.87	5/8	16.03	.631	RM-158/87 RM-158/152 RM-158/203	87 152 203	3.42 5.98 7.99	187 252 303	7.36 9.92 11.93	2
16.00		16.16	.636	RM-160/87 RM-160/152 RM-160/203	87 152 203	3.42 5.98 7.99	187 252 303	7.36 9.92 11.93	2
19.05	3/4	19.25	.758	RM-190/100 RM-190/152 RM-190/203	100 152 203	3.90 5.98 7.99	200 252 303	7.87 9.92 11.93	2
20.00		20.20	.795	RM-200/100 RM-200/152 RM-200/203	100 152 203	3.90 5.98 7.99	200 252 303	7.87 9.92 11.93	2

Download PDF

TEF Series Tube End Facer

Features:

• Ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers.
• One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot.
• (TEF-375 is the exception with the tool suitable for one tube ID only).
• Each tool is supplied with a set of multiple pilots to cover all tube thicknesses.
• Tube end facers for MM sizes of tubes also available.

Specifications

Tube O. D.		Tool Thk. bwg	Model No.	Spare Tool Bits
mm	Inch			Non-Ferrous or Carbon Steel Tubes Model No.	Stainless Steel Tubes Model No.
9.53	3/8	16-22	TEF-375	TEF-376	TEF-376 SS
12.70	1/2	15-20	TEF-500	TEF-506	TEF-506 SS
15.87	5/8	14-18	TEF-625	TEF-626	TEF-626 SS
19.05	3/4	10-18	TEF-750	TEF-756	TEF-756 SS
22.22	7/8	13-18	TEF-875	TEF-876	TEF-876 SS
25.40	1	11-18	TEF-1000	TEF-1006	TEF-1006 SS

Download PDF

Flaring Tool

Features:

• Used to flare projected ends of tubes after expansion. Normally used with a pneumatic chipping hammer.

Specifications

Tube O. D.		Tool Thk. bwg	Model No.
mm	Inch
12.70	1/2	16-22	FT-1
15.87	5/8	14-15 16-22	FT-2 FT-3
19.05	3/4	14-15 16-22	FT-4 FT-5
22.22	7/8	14-15 16-22	FT-6 FT-7
25.40	1	12-15 16-22	FT-8 FT-9
28.57	1.1/8	12-15 16-22	FT-10 FT-11
31.75	1.1/4	8-14 15-22	FT-12 FT-13
34.92	1.3/8	8-14 15-22	FT-14 FT-15
38.10	1.1/2	8-14 15-22	FT-16 FT-17

Download PDF

Beading Tool

Features:

• Fitted with Type 1 round shank for use with standard pneumatic chipping hammer. Other shanks on request

Specifications

Tube O. D.		Tool Thk. bwg	Model No.
mm	Inch
12.70	1/2	16-17 18-19 20-22	BDT-1 BDT-2 BDT-3
15.87	5/8	16-17 18-19 20-22	BDT-4 BDT-5 BDT-6
19.05	3/4	16-17 18-19 20-22	BDT-7 BDT-8 BDT-9
22.22	7/8	16-17 18-19 20-22	BDT-10 BDT-11 BDT-12
25.40	1	16-17 18-19 20-22	BDT-13 BDT-14 BDT-15

Download PDF

Tube Sheet Hole Brush

Features:

• To clean tube sheet bores, prior to tube installation.
• Can be used with any standard pneumatic or electric drill.
• Available in Carbon Steel, Stainless Steel and Brass.

Specifications

Tube O. D.		Model No.
mm	Inch
12.70	1/2	TSHB-1/2
15.87	5/8	TSHB-5/8
19.05	3/4	TSHB-3/4
22.22	7/8	TSHB-7/8
25.40	1	TSHB-1
31.75	1.1/4	TSHB-1.1/4
38.10	1.1/2	TSHB-1.1/2
44.45	1.3/4	TSHB-1.3/4
50.80	2	TSHB-2
57.15	2.1/4	TSHB-2.1/4
63.50	2.1/2	TSHB-2.1/2
69.85	2.3/4	TSHB-2.3/4
76.20	3	TSHB-3

Download PDF

Tube Leak Detector

Features:

The vacuum leak tester SVLD-3000 is a very quick, easy & precise method of testing damage or leaky tubes of boilers, condensers, & heat exchangers. Also it is very economical & fast method compare to hydro test for locating

Tube Capacity	1/4″ (6.3mm) To 3″ (76.2mm)
Air Pressure required	90 psi (6.0 Bar)
Max Vacuum	80%
Temperature range	-20 to 80 C
Weight	0.800 gms
Dimensions	230 X 120 X 170 (MM)

Specifications

Model (SEALS)	Model (NOZZLE HANDLE SIDE)	Model (NOZZLE HANDLE SIDE)	Tube Size
P-750	NH-750	NG-750	1/4″(6.3mm)-¾” (19.05 mm)
P-1250	NH-1250	NG-1250	5/8″(15.9mm)-1.1/4″ (31.7mm)
P-2000	NH-2000	NG-2000	1.1/8″ (28.6mm) -2″ (50.8 mm)
P-3000	NH-3000	NG-3000	1.7/8″ (47.6mm)-3″ (76.2 mm)

Download PDF

Tube Guide

Features:

To ‘pilot’ the tubes through the tube sheets and baffle plates during tube insertion .

Specifications

Tube O. D.		Tube Thk. Bwg.	Model No.
mm	Inch
12.70	1/2	16-18 19-20 21-23	PGT-1 PTG-2 PTG-2.5
15.87	5/8	12-13 14-16 17-20 22-24	PTG-3 PTG-4 PTG-5 PTG-5.5
19.05	3/4	10-12 13-16 17-20 22-24	PTG-6 PTG-7 PTG-8 PTG-8.5
22.22	7/8	10-12 13-16 17-20 21-22	PTG-9 PTG-10 PTG-11 PTG-11.5
25.40	1	8-9 10-12 13-16 17-20 21-23	PTG-12.5 PTG-12 PTG-13 PTG-14 PTG-14.5
31.75	1.1/4	10-13 14-20	PTG-15 PTG-16
34.92	1.3/8	8-9 10-13 14-20	PTG-17 PTG-18 PTG-19
38.10	1.1/2	8-9 10-13 14-20	PTG-20 PTG-21 PTG-22
50.80	2	8-10 11-13 14-18	PTG-23 PTG-24 PTG-25
63.50	2.1/2	10-13 14-18	PTG-26 PTG-27

Download PDF